Antimicrobial and Antibiofilm Potential of Thymus vulgaris and Cymbopogon flexuosus Essential Oils against Pure and Mixed Cultures of Foodborne Bacteria.

The spread of pathogenic and food spoilage microorganisms through the food chain still faces major mitigation challenges, despite modern advances. Although multiple cleaning and disinfection procedures are available for microbial load reduction in food-related settings, microbes can still remain on surfaces, equipment, or machinery, especially if they have the ability to form biofilms. The present study assessed the biofilm-forming properties of pure and mixed cultures of foodborne and spoilage bacteria (Listeria monocytogenes, Enterococcus faecalis, Aeromonas hydrophila, Brochothrix thermosphacta), using polystyrene and stainless steel contact surfaces. Subsequently, the antimicrobial and antibiofilm properties of Thymus vulgaris and Cymbopogon flexuosus essential oils-EOs-were evaluated against these bacteria. Moreover, in silico prediction of the absorption and toxicity values of the EOs' major constituents was also performed, perceiving the putative application in food-related settings. Overall, biofilm formation was observed for all microbes under study, at different temperatures and both contact surfaces. In polystyrene, at 25 °C, when comparing pure with mixed cultures, the combination Listeria-Aeromonas achieved the highest biofilm biomass. Moreover, at 4 °C, increased biofilm formation was detected in stainless steel. Regarding thyme, this EO showed promising antimicrobial features (especially against A. hydrophila, with a MIC of 0.60 µg/µL) and antibiofilm abilities (MBEC of 110.79 µg/µL against L. monocytogenes, a major concern in food settings). As for lemongrass EO, the highest antimicrobial activity, with a MIC of 0.49 µg/µL, was also observed against L. monocytogenes. Overall, despite promising results, the in situ effectiveness of these essential oils, alone or in combination with other antimicrobial compounds, should be further explored.

Agreement between transthoracic echocardiography and esophageal Doppler on aortic flow variables in anesthetized mechanically ventilated dogs.

The use of transthoracic echocardiography (TTE) and esophageal Doppler (ED) for the measurement of hemodynamic variables in anesthetized dogs was studied. Fourteen mixed-breed dogs, without cardiac disease, undergoing general anesthesia for diagnostic or therapeutic procedures were included in this prospective preliminary study. Dogs were premedicated with dexmedetomidine (3 µg/kg) and methadone (0.3 mg/kg), intramuscularly. General anesthesia was induced with propofol intravenously titrated to effect and maintained with isoflurane in oxygen. Animals were positioned in dorsal recumbency. Transthoracic echocardiography was performed using a 5-2 MHz cardiac ultrasound probe placed in the subcostal window, whereas esophageal Doppler was performed using a CardioQ probe (MP50; Deltex Medical, Chichester, UK). Once an appropriate view of the aortic flow was obtained, the variables peak velocity (PV) and velocity-time integral (VTI) were measured. Agreement between methods was evaluated using the Bland-Altman method with single observation per individual. The bias and the limits of agreement (LOA) between the two methods were determined. Mean (± SD) PV was 99.46 cm/s (± 42.73 cm/s) and 110.29 cm/s (± 35.86 cm/s), and VTI was 13.24 cm (± 4.33 cm) and 13.05 cm (± 4.47 cm), for TTE and ED, respectively. Mean differences and LOA were 10.83 cm/s (range: -20.50 to 42.16 cm/s) and -0.19 cm (range: -3.32 to 2.95 cm) for PV and VTI, respectively. No statistically significant differences were determined in the variables measured between TTE and ED in anesthetized dogs without cardiac disease, positioned in dorsal recumbency. This could be of clinical relevance when an evaluation of the intraoperative hemodynamic status of anesthetized dogs is desired.

Concordance entre l'échocardiographie transthoracique et le Doppler oesophagien sur les variables du débit aortique chez des chiens anesthésiés ventilés mécaniquement. L'utilisation de l'échocardiographie transthoracique (TTE) et du Doppler oesophagien (ED) pour la mesure des variables hémodynamiques chez les chiens anesthésiés a été étudiée. Quatorze chiens de race mixte, sans maladie cardiaque, subissant une anesthésie générale pour des procédures diagnostiques ou thérapeutiques ont été inclus dans cette étude préliminaire prospective. Les chiens ont reçu une prémédication avec de la dexmédétomidine (3 µg/kg) et de la méthadone (0,3 mg/kg), par voie intramusculaire. L'anesthésie générale a été induite avec du propofol intraveineux titré à effet et maintenue avec de l'isoflurane dans de l'oxygène. Les animaux ont été placés en décubitus dorsal. L'échocardiographie transthoracique a été réalisée à l'aide d'une sonde à ultrasons cardiaque 5-2 MHz placée dans la fenêtre sous-costale, tandis que le Doppler oesophagien a été réalisé à l'aide d'une sonde CardioQ (MP50; Deltex Medical, Chichester, Royaume-Uni). Une fois qu'une vue appropriée de l'aorte était obtenue, les variables vitesse maximale (PV) et intégrale vitesse-temps (VTI) étaient mesurées. La concordance entre les méthodes a été évaluée à l'aide de la méthode de Bland-Altman avec une seule observation par individu. Le biais et les limites d'accord (LOA) entre les deux méthodes ont été déterminés. La PV moyenne (± SD) était de 99,46 cm/s (± 42,73 cm/s) et 110,29 cm/s (± 35,86 cm/s), et la VTI était de 13,24 cm (± 4,33 cm) et 13,05 cm (± 4,47 cm), pour TTE et ED, respectivement. Les différences moyennes et la LOA étaient de 10,83 cm/s (intervalle : −20,50 à 42,16 cm/s) et de −0,19 cm (intervalle : −3,32 à 2,95 cm) pour PV et VTI, respectivement. Aucune différence statistiquement significative n'a été déterminée dans les variables mesurées entre TTE et ED chez des chiens anesthésiés sans maladie cardiaque, positionnés en décubitus dorsal. Cela pourrait être cliniquement pertinent lorsqu'une évaluation de l'état hémodynamique peropératoire des chiens anesthésiés est souhaitée.(Traduit par Dr Serge Messier).

Niche differentiation drives microbial community assembly and succession in full-scale activated sludge bioreactors.

Network models and community phylogenetic analyses are applied to assess the composition, structure, and ecological assembly mechanisms of microbial communities. Here we combine both approaches to investigate the temporal dynamics of network properties in individual samples of two activated sludge systems at different adaptation stages. At initial assembly stages, we observed microbial communities adapting to activated sludge, with an increase in network modularity and co-exclusion proportion, and a decrease in network clustering, here interpreted as a consequence of niche specialization. The selective pressure of deterministic factors at wastewater treatment plants produces this trend and maintains the structure of highly functional and specialized communities responding to seasonal environmental changes.

Haloarchaea have a high genomic diversity for the biosynthesis of carotenoids of biotechnological interest.

Haloarchaea are mostly components of the microbial biomass of saline aquatic environments, where they can be a dietary source of heterotrophic metazoans or contribute to flamingo's plumage coloration. The diversity of secondary metabolites (SMs) produced by haloarchaea, which might play multiple ecological roles and have diverse biotechnological applications has been largely understudied. Herein, 67 haloarchaeal complete genomes were analyzed and 182 SMs biosynthetic gene clusters (BGCs) identified that encode the production of terpenes (including carotenoids), RiPPs and siderophores. Terpene BGCs were further analysed and it was concluded that all haloarchaea might produce squalene and bacterioruberin, which one a strong antioxidant. Most of them have other carotenoid BGCs that include a putative ß-carotene ketolase that was not characterized so far in haloarchaea, but may be involved with canthaxanthin's biosynthesis. The production of bacterioruberin by Haloferax mediterranei ATCC 33500 was found to be not related to its antimicrobial activity.

COVID-19: ¿una oportunidad para la toma de conciencia sobre el cuidado integral del odontólogo? / COVID-19: An opportunity to raise awareness about dentists' holistic wellbeing?

La pandemia de COVID-19 generó en la comunidad odon- tológica argentina un profundo desconcierto e incertidumbre frente a su práctica profesional, su economía y su cuidado. Mediante un cuestionario difundido a través de redes so- ciales en octubre de 2020, se formularon preguntas vinculadas al ejercicio profesional en ese contexto y otras en las que se incluyeron variables referidas a signos de ansiedad, depresión y resiliencia. Los odontólogos presentaron signos de estrés, ansiedad, tensión emocional, dificultad para conciliar el sueño, senti- mientos de culpa y sensación de soledad. Manifestaron casi en su totalidad que su esfuerzo y el cuidado de su persona frente a este nuevo paradigma no son valorados por el sistema de salud y que se evidencia en la escasa retribución que perciben por sus prestaciones. Las conclusiones tienen el mandato del cambio pues los datos arrojados por la encuesta y el sentir manifestado con vehemencia y desolación ponen sobre la mesa la necesidad de iniciar una nueva etapa (AU)

The COVID-19 pandemic created a profound state of be- wilderment and uncertainty among dentists regarding their professional practice, economy and personal care. An online survey posted on social media in October 2020 asked ques- tions about professional practice in this context and other variables such as signs of anxiety, depression and resilience. Dentists reported signs of stress, anxiety, emotional tension, difficulty to get to sleep, and feelings of guilt and loneliness. Most of them felt that the efforts they made to do their job and ensure their personal care in this new paradigm were not valued by the healthcare system, as reflected by the low compensation for their services. From the data obtained through the survey and the feelings of vehemence and grief expressed by respondents, it is concluded there is a need for action and change (AU)

Hospitalización a domicilio y en hotel medicalizado durante la primera ola de la pandemia por COVID-19: caso clínico / Hospitalization at home and in medicalized hotels during the first wave of the COVID-19 pandemic: a case report

La pandemia de COVID-19 ha generado que el sistema sanitario realice ajustes y cambios para hacer frente a la emergencia sanitaria y tenga en cuenta otras modalidades asistenciales como la hospitalización a domicilio (HaD). Durante la primera ola de la pandemia de 2020 el equipo HaD, multidisciplinario y transversal, del Hospital Clínic de Barcelona atendió pacientes COVID-19 y no COVID-19 en domicilio y también se encargó de la gestión de un hotel medicalizado.Se presenta el caso de un paciente ingresado en HaD con diagnósticos de prostatitis aguda y COVID-19 durante la primera ola de la pandemia que fue atendido en ambos entornos.Este caso clínico ejemplifica la importancia de la continuidad asistencial. El equipo de HaD, experto y entrenado en la realización de visitas domiciliarias, se ha adaptado a la nueva situación de pandemia, prestando atención y cuidados de calidad.(AU)

The COVID-19 pandemic has led the health system to make adjustments and changes in order to face the healthcare emergency, and to consider other healthcare modalities such as hospitalization at home (HaH). During the first wave of the pandemic in 2020, the HAH multidisciplinary and cross-sectional team of the Hospital Clínic of Barcelona managed at home COVID-19 patients as well as non-COVID-19 patients, and was also in charge of managing a medicalized hotel.We present the case of a patient admitted to HaH with diagnoses of acute prostatitis and COVID-19 during the first wave of the pandemics, who was managed in both settings.This case report is an example of the importance of continuity of care. The HaH team, experienced and trained on conducting home visits, has adapted to the new pandemic situation, providing quality care for patients.(AU)

Arsenic speciation in cooked food and its bioaccessible fraction using X-ray absorption spectroscopy.

Thermal processing or the digestion process can alter the forms of arsenic (As) present in food. Identification of As species is necessary to accurately determine the risk associated with food consumption. X-ray absorption near-edge structure (XANES) was used to investigate As species in rice, asparagus, and garlic boiled in water containing As(V), and in their bioaccessible fractions (solubilized As after gastrointestinal digestion). The XANES analysis revealed the presence of As(III) (11871.5 eV) or As(III)-S [As(III)-Cys, 11869.6 eV] solution in the cooked foods and in their bioaccessible fractions. The percentage of trivalent species (12-55%) followed the order asparagus ≫ rice ≈ garlic. In the asparagus and garlic samples, part of the As(V) (tetrahedral form) [11875 eV] that had been added appeared in the form of an octahedral As(V) compound [As(V)-glycerol, 11876 eV]. All these changes could considerably modify the risk associated with ingestion of As-contaminated food.

Tuning up microbiome analysis to monitor WWTPs' biological reactors functioning.

Wastewater treatment plants (WWTPs) are necessary to protect ecosystems quality and human health. Their function relies on the degradation of organic matter and nutrients from a water influent, prior to the effluent release into the environment. In this work we studied the bacterial community dynamics of a municipal WWTP with a membrane bioreactor through 16S rRNA gene sequencing. The main phyla identified in the wastewater were Proteobacteria, Bacteroidetes, Chloroflexi, Planctomycetes and Actinobacteria. The WWTP is located in Spain and, like other studied WWTP in temperate climate zones, the temperature played a major role in community assembly. Seasonal community succession is observed along the two years sampling period, in addition to a continual annual drift in the microbial populations. The core community of the WWTP bioreactor was also studied, where a small fraction of sequence variants constituted a large fraction of the total abundance. This core microbiome stability along the sampling period and the likewise dissimilarity patterns along the temperature gradient makes this feature a good candidate for a new process control in WWTPs.

Unravelling mechanisms of bacterial quorum sensing disruption by metal-based nanoparticles.

Nanoparticles are released in the environment causing a negative impact in several ecosystems such as microbial communities. To adapt to environmental changes some bacteria use a collective behaviour ruled by a cell-to-cell communication process called quorum sensing (QS). In this study, the impact of some of the most employed metal-based nanoparticles, such as zinc oxide nanoparticles (ZnONPs), titanium dioxide nanoparticles (TiO2NPs) and silver nanoparticles (AgNPs) on bacterial QS has been assessed by using two different strains of the model organism Chromobacterium violaceum and by employing different experimental conditions. TiO2NPs were tested with and without applying a previous step of UV-irradiation while the effect of AgNPs of two diameter sizes (40 and 60 nm) and two different coating agents (PVP and citrate) was evaluated. Results evidenced that all nanoparticles produced a significant effect on violacein production and therefore, in the QS system. ZnONPs mainly disrupted the QS steps related to signal perception and response whereas TiO2NPs and AgNPs affected the autoinducer biosynthesis. AgNPs with the smallest size and citrate as capping agent produced the most deleterious effect while the impact of TiO2NPs was not affected by UV irradiation. The present study provides new insights into the mechanisms by which these commonly employed metal-based nanoparticles disturb bacterial QS-based communication and clearly evidences the potential risk of releasing nanoparticles to the environment, especially for microbial communities which play a key role in many environmental and technological processes.

Selenium and tellurium-based nanoparticles as interfering factors in quorum sensing-regulated processes: violacein production and bacterial biofilm formation.

A cell-to-cell communication system called quorum sensing (QS) promotes the transcription of certain target genes in bacterial cells leading to the activation of different cellular processes, some of them related to bacterial biofilm formation. The formation of bacterial biofilms favours antibiotic resistance, which is nowadays a significant public-health problem. In this study, the effect of selenium (SeNPs) and tellurium (TeNPs) nanoparticles was examined in two bacterial processes mediated by QS: violacein production by Chromobacterium violaceum and biofilm formation by Pseudomonas aeruginosa. For this purpose, quantification of the pigment production in the presence of these nanoparticles was monitored using the C. violaceum strain. Additionally, a combination of different microscopical imaging techniques was applied to examine the changes in the 3D biofilm structure of P. aeruginosa, which were quantified through performing architectural metric calculations (substratum area, cell area coverage and biovolume). SeNPs produce an 80% inhibition in the violacein production by C. violaceum and a significant effect on the P. aeruginosa biofilm architecture (a reduction of 80% in the biovolume of the bacterial biofilm was obtained). TeNPs similarly affect violacein production and the P. aeruginosa biofilm structure but at lower concentration levels. The results obtained suggest an important disruption of the QS signalling system by SeNPs and TeNPs, supporting nanotechnology as a promising tool to fight against the emerging problem of bacterial resistance related to bacterial biofilm formation.

Protección pulpar directa en dientes de cabra: un modelo experimental / Direct pulp capping in goat teeth: an experimental model

Objetivos: Evaluar la utilidad de un modelo animal mamífero como la cabra, a fin de estudiar biomateriales indicados para protección pulpar directa. Materiales y métodos: Bajo anestesia general, se realizaron exposiciones pulpares en las caras vestibulares de los ocho incisivos inferiores de cuatro (n=4) cabras de raza criolla. En cada animal, 6 (n=6) exposiciones fueron protegidas con un material experimental (ACPc), y las 2 (n=2) restantes, con un material de control a base de MTA (WMTA). En total se realizaron 24 (n=24) protecciones con ACPc y 8 (n=8) con WMTA. Las cabras fueron separadas en dos grupos de dos (n=2) animales cada uno. Bajo anestesia general, los dientes se extrajeron a los 30 (Grupo 1) y 60 días (Grupo 2), se fijaron en formol búffer fosfato al 10% y se procesaron para el estudio histológico de rutina. Los animales no fueron sacrificados. En cada período, se analizaron 12 (n=12) protecciones pulpares con ACPc y 4 (n=4) con WMTA. Resultados: Grupo 1: Once (n=11) pulpas protegidas con ACPc presentaron puente dentinario completo e inflamación crónica remanente. En un caso no hubo puente dentinario y la pulpa estaba crónicamente inflamada. Las 4 (n=4) pulpas protegidas con WMTA presentaron puente dentinario e inflamación crónica. Grupo 2: Las 12 (n=12) pulpas protegidas con ACPc se encontraban normales, con puente dentinario completo, buena irrigación y capa de odontoblastos continua. Las 4 (n=4) pulpas protegidas con WMTA revelaron condiciones similares. Los resultados se analizaron mediante el test de probabilidad exacta de Fischer (P<0,05). Con respecto al factor inflamación, hubo diferencias significativas (P<0,001) entre los resultados obtenidos a 30 y 60 días, pero no hubo diferencias entre ACPc y WMTA (P>0,05) dentro de cada uno de los períodos de observación. En cuanto a la presencia de puente dentinario, no hubo diferencias significativas (P>0,05) entre ACPc y WMTA en ambos períodos de observación. Conclusiones: Los resultados sugieren que la cabra constituye un modelo animal adecuado para los ensayos de protección pulpar directa (AU)

Aim: To evaluate the suitability of the goat as an animal model for the study of biomaterials indicated for direct pulp capping. Materials and methods: Under general anaesthesia, pulp exposures were performed on the buccal surfaces of the eight mandibular incisors of four (n=4) healthy Creole goats. The exposures were capped with two biomaterials developed for PPD. In each animal, 6 (n=6) exposures were capped with an experimental material (ACPc) while for the remaining 2 (n=2) exposures a white MTA (WMTA) was used as the control. A total of 24 (n=24) direct pulp capping with ACPc and 8 (n=8) with WMTA were done. The goats were separated into two groups of two (n=2) animals each. The teeth were extracted after 30 days (Group 1) and 60 days (Group 2) and fixed in 10% phosphate buffered formalin and processed for routine histology. The animals were not euthanized. In each period, 12 (n=12) PPD with ACPc and 4 (n=4) with WMTA were analyzed. Results: Group 1: Eleven (n=11) pulps capped with ACPc showed complete dentin bridges and chronic inflammation. In one case without dentin bridges the pulp was chronically inflamed. The four pulps capped with WMTA revealed the presence of dentin bridges and chronic inflammation. Group 2: Twelve pulps protected with ACPc showed a complete dentin bridges. In addition, well irrigated and healthy pulp tissues along with a continuous odontoblast palisade were observed. The four pulps capped with WMTA revealed similar features. In cases showing dentin bridges, a few numbers of empty spaces as well as odontoblast like cell inclusions were detected. The results were analyzed by the Fisher's exact test (P<0.05). With respect to the inflammation factor there were significant differences between the 30 and 60-day observation periods (P<0.001), but no differences were observed between ACPc and WMTA (P>0.05) within each of the observation periods. When the presence or absence of a dentin bridges was analyzed, no significant differences (P>0.05) were found between materials at each observation period. Conclusions: The results suggest that the goat seems to be an appropriate animal model for direct pulp capping evaluation (AU)

Quorum Sensing versus Quenching Bacterial Isolates Obtained from MBR Plants Treating Leachates from Municipal Solid Waste.

Quorum sensing (QS) is a mechanism dependent on bacterial density. This coordinated process is mediated by the synthesis and the secretion of signal molecules, called autoinducers (AIs). N-acyl-homoserine lactones (AHLs) are the most common AIs that are used by Gram-negative bacteria and are involved in biofilm formation. Quorum Quenching (QQ) is the interference of QS by producing hydrolyzing enzymes, among other strategies. The main objective of the present study was to identify QS and QQ strains from MBR wastewater treatment plants. A total of 99 strains were isolated from two Spanish plants that were intended to treat leachate from municipal solid waste. Five AHL producers were detected using AHL biosensor strains (Chromobacterium violaceum CV026 and Agrobacterium tumefaciens NT1). Fifteen strains of seventy-one Gram-positive were capable of eliminating or reducing at least one AHL activity. The analysis of 16S rRNA gene sequence showed the importance of the Pseudomonas genus in the production of biofilms and the relevance of the genus Bacillus in the disruption of the QS mechanism, in which the potential activity of lactonase or acylase enzymes was investigated with the aim to contribute to solve biofouling problems and to increase the useful lifespan of membranes.

Unravelling the interactions among microbial populations found in activated sludge during biofilm formation.

Microorganisms colonize surfaces and develop biofilms through interactions that are not yet thoroughly understood, with important implications for water and wastewater systems. This study investigated the interactions between N-acyl homoserine lactone (AHL)-producing bacteria, yeasts and protists, and their contribution to biofilm development. Sixty-one bacterial strains were isolated from activated sludge and screened for AHL production, with Aeromonas sp. found to be the dominant AHL producer. Shewanella xiamenensis, Aeromonas allosaccharophila, Acinetobacter junii and Pseudomonas aeruginosa recorded the highest adherence capabilities, with S. xiamenensis being the most effective in surface colonization. Additionally, highly significant interactions (i.e. synergic or antagonistic) were described for dual and multistrain mixtures of bacterial strains (P. aeruginosa, S. xiamenensis, A. junii and Pseudomonas stutzeri), as well as for strongly adherent bacteria co-cultured with yeasts. In this last case, the adhered biomass in co-cultures was lower than the monospecific biofilms of bacteria and yeast, with biofilm observations by microscopy suggesting that bacteria had an antagonist effect on the whole or part of the yeast population. Finally, protist predation by Euplotes sp. and Paramecium sp. on Aeromonas hydrophila biofilms not only failed to reduce biofilm formation, but also recorded unexpected results leading to the development of aggregates of high density and complexity.

Mechanism of Hg(II) Immobilization in Sediments by Sulfate-Cement Amendment.

Reactive amendments such as Portland and super-sulfate cements offer a promising technology for immobilizing metalloid contaminants such as mercury (Hg) in soils and sediments through sequestration in less bioavailable solid forms. Tidal marsh sediments were reacted with dissolved Hg(II) in synthetic seawater and fresh water solutions, treated with Portland cement and FeSO4 amendment, and aged for up to 90 days. Reacted solids were analyzed with bulk sequential extraction methods and characterized by powder X-ray diffraction (XRD), electron microscopy, and synchrotron X-ray absorption spectroscopy at the Hg LIII- and S K-edge. In amended sediments, XRD, SEM and sulfur K-edge XANES indicated formation of gypsum in seawater experiments or ettringite-type (Ca6Al2(SO4)3(OH)12.26H2O) phases in fresh water experiments, depending on the final solution pH (seawater ∼8.5; freshwater ∼10.5). Analysis of Hg EXAFS spectra showed Cl and Hg ligands in the first- and second-coordination shells at distances characteristic of a polynuclear chloromercury(II) salt, perhaps as a nanoparticulate phase, in both seawater and fresh water experiments. In addition to the chloromercury species, a smaller fraction (∼20-25%) of Hg was bonded to O atoms in fresh water sample spectra, suggesting the presence of a minor sorbed Hg fraction. In the absence of amendment treatment, Hg sorption and resistance to extraction can be accounted for by relatively strong binding by reduced S species present in the marsh sediment detected by S XANES. Thermodynamic calculations predict stable aqueous Hg-Cl species at seawater final pH, but higher final pH in fresh water favors aqueous Hg-hydroxide species. The difference in Hg coordination between aqueous and solid phases suggests that the initial Hg-Cl coordination was stabilized in the cement hydration products and did not re-equilibrate with the bulk solution with aging. Collectively, results suggest physical encapsulation of Hg as a polynuclear chloromercury(II) salt as the primary immobilization mechanism.

Membrane bioreactor wastewater treatment plants reveal diverse yeast and protist communities of potential significance in biofouling.

The yeast community was studied in a municipal full-scale membrane bioreactor wastewater treatment plant (MBR-WWTP). The unexpectedly high diversity of yeasts indicated that the activated sludge formed a suitable environment for them to proliferate, with cellular concentrations of 2.2 ± 0.8 × 10(3) CFU ml(-1). Sixteen species of seven genera were present in the biological reactor, with Ascomycetes being the most prevalent group (93%). Most isolates were able to grow in a synthetic wastewater medium, adhere to polyethylene surfaces, and develop biofilms of variable complexity. The relationship between yeast populations and the protists in the MBR-WWTP was also studied, revealing that some protist species preyed on and ingested yeasts. These results suggest that yeast populations may play a role in the food web of a WWTP and, to some extent, contribute to membrane biofouling in MBR systems.

Arsenic speciation in the dispersible colloidal fraction of soils from a mine-impacted creek.

Arsenic and iron speciation in the dispersible colloid fraction (DCF; 10-1000 nm) from an As-rich mine waste pile, sediments of a streambed that collects runoff from waste pile, the streambed subsoil, and the sediments of a downstream pond were investigated by combining asymmetrical-flow field-flow fractionation (AsFlFFF)/inductively-coupled plasma-mass spectrometry (ICP-MS), transmission electron microscopy (TEM) and X-ray absorption (XAS) spectroscopy. Calcium, Fe and As (Fe/As molar ratio ∼ 1) were the main components of the DCF from waste pile. TEM/EDS and As and Fe XAS analysis revealed the presence of nanoparticle scorodite in this same DCF, as well as Fe nanoparticles in all samples downstream of the waste pile. Arsenic and Fe XAS showed As(V) adsorbed onto nanoparticulate ferrihydrite in the DCF of downstream samples. Micro-X-ray fluorescence indicated a strong correlation between Fe and As in phyllosilicate/Fe(3+) (oxi) hydroxide aggregates from the sediment pond. Fractionation analysis showed the mean particle size of the DCF from the streambed sample to be smaller than that of the streambed subsoil and sediment ponds samples. These results show that an important and variable fraction of As may be bound to dispersible colloids that can be released from contaminated soils and transported downstream in natural systems.

Study of Fresh and Hardening Process Properties of Gypsum with Three Different PCM Inclusion Methods.

Gypsum has two important states (fresh and hardened states), and the addition of phase change materials (PCM) can vary the properties of the material. Many authors have extensively studied properties in the hardened state; however, the variation of fresh state properties due to the addition of Micronal® DS 5001 X PCM into gypsum has been the object of few investigations. Properties in fresh state define the workability, setting time, adherence and shrinkage, and, therefore the possibility of implementing the material in building walls. The aim of the study is to analyze, compare and evaluate the variability of fresh state properties after the inclusion of 10% PCM. PCM are added into a common gypsum matrix by three different methods: adding microencapsulated PCM, making a suspension of PCM/water, and incorporating PCM through a vacuum impregnation method. Results demonstrate that the inclusion of PCM change completely the water required by the gypsum to achieve good workability, especially the formulation containing Micronal® DS 5001 X: the water required is higher, the retraction is lower (50% less) due to the organic nature of the PCM with high elasticity and, the adherence is reduced (up to 45%) due to the difference between the porosity of the different surfaces as well as the surface tension difference.

Do firstborn children have an increased risk of ADHD?

OBJECTIVE: Although previous reports have found no birth-order influence on ADHD risk, the authors hypothesize that being the firstborn is a risk factor for developing ADHD. METHOD: They selected all of the currently treated ADHD outpatients (n = 748) from our database. Families with adopted sons, nonnuclear families, and families with only one child and with sons (affected or unaffected) younger than 6 or older than 18 years were excluded. A total of 181 families with 213 ADHD sons met the inclusion criteria. We used all siblings without a clinical diagnosis of ADHD and who had no contact with our service as our unaffected controls (n = 173). RESULTS: The bivariate analysis showed that ADHD was associated with birth order and that firstborn children had nearly twice the ADHD risk of children with other birth orders. CONCLUSION: birth order can be an ADHD risk factor in clinical samples.

Uso del compuesto de minerales trióxido (MTA) como material de obturación apical en dientes permanentes jóvenes con necrosis pulpar y ápices incompletamente desarrollados: informe de un caso / Mineral trioxide aggregate (MTA) as an apical plug in teeth with pulp necrosis and immature apexes: a case report

Objetivo: describir el manejo clínico de un molar inferior con necrosis pulpar y raíces incompletamente desarrolladas. Caso clínico: se realizó un tratamiento endodóntico mediante un protocolo de apexificación, empleando tapones apicales de un compuesto de minerales trióxido (MTA), en un primer molar inferior con pulpa necrótica y ápices incompletamente desarrollados, pertenecientes a un paciente masculino de 8 años de edad. El control clínico y radiográfico realizado a los 31 meses posoperatorios reveló que el paciente se encontraba asintomático y confortable. Las raíces habían completado su desarrollo y las estructuras periapicales se habían normalizado. Conclusión: los resultados sugieren que, luego de una adecuada desinfección y preparación del conducto radicular, el uso de tapones de MTA constituye una alternativa interesante y eficaz en los procedimientos de apexificación